Neumann U67 Set
Artikelnummer 1055614Return of a legend On its launch in 1960, the U 67 was quickly adopted as the new studio standard because of its extraordinary versatility and sound quality.
Ej i lager, kontakta oss för leveranstid
Betala direkt, med faktura eller delbetalning - Spara kort och bankkonto - Smidigt och säkert - Klarna köparskydd
87200 kr/st
The U 67 was the first microphone
equipped with the famous K 67 capsule, which has since become associated with “the
2/3
Neumann sound” and continues to be used in its successor, the U 87 A. No less
important is the U 67’s masterful tube circuit, which features a clever pre-emphasis/deemphasis
scheme to minimize tube hiss. The U 67 was also the first microphone to
address modern recording techniques such as close miking, with its switchable low-cut
filter compensating for the proximity effect occurring at short recording distances. Using
its pre-attenuation, the U 67 can handle high sound pressure levels of up to 124 dB
without distortion – and much more if users do not mind a bit of “tube grit”…
Sonically, the current re-issue is identical to the U 67 made from 1960–1971. It uses the
same capsule and electronic design. Key parts, such as the BV 12 output transformer,
have been meticulously reproduced according to original documentation. Its EF86 tubes
have been carefully selected in a dedicated measurement facility for optimal
characteristics and lowest noise.
U 67 Set
The U 67 comes in a vintage case that is – just
like the U 67 re-issue – hand-made in Germany.
Besides the microphone, it includes an elastic
suspension, a microphone cable and the
NU 67 V power supply. The power supply was
redesigned to meet today’s strict safety
requirements and to accommodate the slightly
higher filament current of newer premium-grade
tubes. The new NU 67 V is fully compatible with
older U 67 microphones, and automatically
adapts to the local mains voltage.
- Reissue of the U67 from the 60s according to the original specifications
- K67 capsule
- Acoustic operation: pressure gradient transducer
- Switchable polar pattern: Omni, cardioid, and figure-8
- Frequency response: 20 - 20,000 Hz
- Max. sound pressure level: 124 dB (for K <0.5% with pre-damping)
- Nominal impedance: 200 ohms
- Nominal load impedance: 1 kOhm
- Switchable bass roll-off
- Switchable pre-attenuation
- Dimensions: 200 x 56 mm (length x diameter)
- Weight: 560 g
- Includes elastic suspension, power supply, microphone cable and handmade vintage aluminium case