D400T

The D400T forms the basis.

Besides all basic functions like "play", "stop" and "record" you can control settings like volume and panorama with the rotary encoders surrounded by an LED ring. By use of buttons 1 to 8 you can assign several functions to the rotary encoders.
With the four additional rotary encoders you easily control an EQ.

The Jog-Shuttle combination takes you to the correct spot in a matter of seconds. The available sockets to connect a sustain or expression pedal give you the chance to even use your feet.

You can connect up to 8 extensions to the D400T which gives you up to 64 faders at the same time.

D400F

The combination of 8 highly precise motorized ALPS faders with 3 LED push buttons each, gives you full control over your audio tracks. The touch-sensitive surface of all faders makes automation become child's play.
With an accuracy of up to 4000 levels per fader you always move your controllers exactly to where you want them to be.

Due to their compact construction there is room for more than one D400F on every desk.

As each extension can be connected to another extension there are sufficient USB ports at any time.

D400S

To keep an eye on all your tracks in all lighting conditions the D400 can be extended with an OLED display. Readability is guaranteed from every angle in darkness as well as in sunlight by the use of organic light diodes.

With a resolution of 1024x64 pixels combined with the high refresh rate working professionally is not an issue and the workflow is optimized. Alongside 2 lines of text the display offers a metering view with clipping. The 6.5mm thin frame follows the modern design of the D400. The height of the D400F only increases by 2.2cm. This results in a total height of 5.5cm which keeps the view on the monitor clear.

Specifications

D400T

• 8 endless rotary encoders with snap
• 4 LED rings with 15 LEDs each
• 21 programmable LED push buttons
• jog wheel with shuttle
• 2x 6,35mm sockets for expression and sustain pedal
• USB B 2.0 connector
• connector for extension
• 238 x 137 x 33mm (chassis)

D400F

• 8 touch-sensitive 100mm ALPS motor faders with a resolution of up to 12bit (4000 steps)
• 24 programmable LED push buttons
• 9V power supply
• connector for another extension
• 238 x 238 x 33mm (chassis)
• extension for the D400T, no stand-alone use

D400S

• OLED display
• 1024x64 pixel
• 2 lines of text with 8 characters each⁶
• Stereo / Mono metering incl. clipping⁶
• 232 x 36 x 6.5mm, 238 x 238 x 55mm (D400F + D400S)
• extension for the D400F, no stand-alone use